Enhanced RGB LED Controller for WS2812/WS2811/WS2812B Dream Color LED Strips

This RF LED controller supports WS2811, WS2812B LED lights, providing over 300 vibrant color modes, such as rainbow, wave, breathing, strobe, gradual change, color cycle, comet, static, fading, and chasing. The color-changing speed and brightness are adjustable.

Equipped with a 3-pin JST connector and USB female connector, the controller is compatible with all 3-pin single-signal IC chip LED products. The RF remote can pair with only one receiver, making it a plug-and-play solution that requires no soldering. The device automatically saves user settings when powered off and allows for adjusting the color order (RGB, GRB, BRG, etc.).

The wireless RF remote control has a range of 32-98 ft (10-30 m), and the compact size makes it convenient to use. The controller operates on a DC 5V input, but it cannot regulate the output voltage. Therefore, it's crucial to choose a power supply that matches the LED lights, as the input and output voltages must be the same (e.g., DC 5V for WS2812B LED strips).

If the controller becomes too hot during use, it's recommended to provide the light strips with a separate power supply or use amplifiers to avoid overloading the controller.

The maximum number of control pixels is 2048, but the factory default is set to 300 pixels (approximately 5 meters of light strip length). To adjust the number of LED pixel points, press and hold the setup menu for 5 seconds, then use the MODE+ and MODE- buttons to set the desired value, adjusting in increments of 32 points at a time. To set the correct RGB sequence, press the B button until the first three lights display red, green, and blue.

The product's technical specifications are as follows: - Working Voltage: DC 5V (supports 5V only) - Output Current: 3x2A (3-way) - Output Power: 5V<30W - Static Power Consumption: <1W - Maximum Control Points: 2048 - Connection Method: RF Remote Control - RF Remote Control Distance: 32-98 ft (10-30 m) - Operating Temperature: -20-60°C (-4-140°F)

Please note that this controller is only suitable for 5V WS2812/WS2811/WS2812B LED strips. It cannot control SK6812 RGBW LED lights or regular RGB LEDs without a driver IC.

RGBZONE is committed to continuous product innovation and providing personalized life experiences. As experts in LED controllers, we strive to deliver high-quality products that improve your quality of life. We welcome your suggestions and will continue to optimize our offerings to better meet your needs.

product information: